2004 Hunter 33' (10.06 m) 33
Bridgeport, Connecticut, United States
CHILLIN
2004 Hunter 33
Flag of Registry: United States
- Cruisers
- Sail
- Used
- Diesel
- Fiberglass Hull
Vessel ID# Last Updated: 2024-07-24 11:07:32
Description
The CHILLIN is a 2004 model HUNTER 33 .. also knows as the "33-2" .. as manufactured in 2003 for the 2004 model year by HUNTER MARINE of Alachua, FL. The "33-2" was first introduced for the 2004 model year and it continues to be a modern, sophisticated design that compares very well with competitor's offerings since her introduction and to the present day.
The CHILLIN has been only lightly used over the years by only a handful of Owners. She's been well-kept and is complete with all of the amenities for comfortable and safe local cruising & day-sailing. Her inventory of a Dodger & Bimini, U-K Sails, RAYMARINE electronics, cockpit cushions .. right down to the newer gas grill! .. are all in excellent condition.
The Owners have elected to sell the CHILLIN now .. in mid-Season .. as both work and other Family plans have intervened with the time available to enjoy her as she should be. Given her overall condition, equipage & "immediate & turn-key" availability, an appointment for a viewing is certainly encouraged.
Specifications
LOA: 33' 6'' (10.21 Meters)
Type: Sail- Used
Year: 2004
Beam: 11' 6''
LWL: 29' 5''
Draft Max: 4' 6''
Draft Min: 4' 6''
Cabins: 2
Single Berths: 6
Heads: 1
Maximum Speed: 6 Knots
Cruise Speed: 5 Knots
Fuel Type: Diesel
Hull Material: Fiberglass
Hull Shape: Displacement
Bridge Clearance: 47' 0''
Fuel Tank: 25 Gallons (94.64 Liters)
Fresh Water: 50 Gallons (189.27 Liters)
Holding Tank: 20 Gallons (75.71 Liters)
Displacement: 11016 lbs
Photos click to view all
Engines
Engine 1
- Engine Make: Yanmar
- Engine Model: 3YM30 FWC (3) cylinder
- Engine Year: 2003
- Engine Type: Inboard
- Drive Type: Direct
- Power HP: 24.00
- Fuel Type: Diesel
- Hours: 650.00
Full Details
Overview
Hull & Deck
- WHITE Gelcoat topsides finish
- Boot-tops; wide DARK BLUE & narrow BLACK
- Cove Accent stripe, DARK BLUE
- Bottom, BLUE
- Fin keel, external lead w/ bulb (note: shoal draft, 4' 6')
- Spade rudder
- Rub rail, black rubber w/ stainless steel insert
- Opening port, starboard side aft (note: for Aft Cabin)
Deck
- WHITE Gelcoat finish for decks & Cockpit areas
- LIGHT GRAY Gelcoat for contrasting non-skid surfaces
- Bow Pulpit, double-rail, stainless steel
- Life-lines, double for upper & lower, WHITE-coated stainless steel
- Life-line gates, port & starboard
- Stern rail, double-rail stainless steel w/ boarding gate
- (3) Deck hatches, LEWMAR aluminum-framed w/ LEXAN, opening (note: (2) 17" x 17" on deck, (1) 11"x 16" from Aft Cabin to Cockpit)
- (2) Opening ports
- (6) Portlights, fixed (note: in Salon w/ (2) forward & (2) each, port & starboard)
- Deck vent, Dorade-type (note: for Salon)
- Jib / Genoa tracks, (2) sets, aluminum w/ adjustable cars (note: mounted on Coachroof forward & side decks)
- Radar Arch, stainless steel
- Mainsheet Traveler System w/ cross-hauls (note: mounted on Radar Arch w/ lines accessible at the base near the Helm Station)
- Helm Station w/ pedestal; LEWMAR wheel steering, single-lever throttle & shift controls, binnacle w/ DANFORTH 3.5" compass, stainless steel guard, wheel brake & mounting area on guard for the RAYMARINE electronics, (4) drink holders & Cockpit Table, folding, fiberglass w/ stainless steel supports
- Cockpit storage lockers, port & starboard (note: including the propane locker to starboard, aft)
- (6) Cleats, aluminum; (2) forward, (2) amidships & (2) aft
- Grab / Safety rails on Coachroof, stainless steel
Accommodations
- The interior of the HUNTER 33-2 is provided with teak interior furniture that is satin-varnished.
Salon
- Headroom: 6' 4"
- Companionway entrance w/ (3) piece PLEXI boards, lockable
- Sliding Companionway hatch into integral sea-hood
- Teak & Holly Cabin Sole, veneer & varnished
- Dinette table (note: port side & converts to a "double" berth)
- Settee berth, to starboard & opposite the Dinette area settee berth
- Interior cushions
Fore Cabin
- Large berth
- Settee w/ cushion
- Hanging locker
Aft Cabin
- Large double berth (note: lies athwartships)
- LEWMAR Opening hatch to starboard for ambient light & ventilation & accessible via the Cockpit seat lid, starboard side.
Galley
- The large "U" shaped Galley is located aft, port side adjacent to the Companionway.
- Stove / Oven, FORCE 10 (2) burner, propane, gimbaled
- Remote gas shut-off switch
- Propane tank (note: located in Cockpit, starboard side aft w/ provision for 2nd tank)
- Microwave, ORIGO
- Refrigeration, COOLMATE 12 VDC
- Galley sink, stainless steel
- CORIAN Countertops
Head
- The Head is located to starboard & aft opposite the Galley.
- Marine Head, manual, raw water, USCG Type III system
- Holding tank, 20 USG, aluminum
- Tank level gauge (note: at Nav Station)
- Macerator pump, JABSCO
- "Y" Valve for overboard discharge when offshore
- Hot & cold pressure water service
- Vanity w/ sink
- Countertop, LIGHT TAN "faux marble"
- Shower. hand-held unit, w/ sump pump, JABSCO
- Ventilator, solar-powered
RIG, RIGGING, WINCHES & SAILS
The HUNTER 33-2 was produced with their trademark B&R Fractional Rig w/ swept-back spreaders. This allows for the elimination of the backstay for the standing rigging component.
- Dimensions: I=37' 5", J=10' 10", P=36' 5"" & E= 13' 10"
- Mast height: 46' 7" (Standard Rig)
- Sail Area: 625 Sq / Ft (Main + 100% F/T, for Standard Rig)
- Air Draft: 47' (approx. for DWL to Masthead)
Rig
- B&R Rig
- Double spreaders
- Deck-stepped spar
- Aluminum mast & boom, silver anodized
- Internal halyards
Rigging
- Roller-furling, SELDEN Furlex 700S
- Standing rigging, stainless steel
- Boom vang, SELDEN rigid spring / oil type w/ control line led aft to the Cockpit
- Line clutches / stoppers aft, LEWMAR Spinlock's
- All halyards & control lines led aft to the SPINLOCK stoppers on the Coach roof aft, port & starboard
- Lazy-jacks for mainsail
Winches (LEWMAR)
- (2) L30 CST (2) speed self-tailing Primary genoa / jib sheet
- (2) L16 CST (2) speed self-tailing Halyard / line
Sails (U-K SAILMAKERS)
- Mainsail, Dacron, full-batten w/ reef points for jiffy / slab reefing
- Mainsail cover, Dark Blue SUNBRELLA
- Jib, Dacron, 100%, Roller-furling w/ tabling cover, Dark Blue SUNBRELLA
Electronics
The Navigation, Performance & Autopilot electronics are installed in a pod at the Helm Station.
Communications
- VHF, ICOM M402 w/ Remote Mic in Cockpit
Navigation
- RAYMARINE ST-40 Speed & Log
- RAYMARINE ST-40 Depth
- RAYMARINE SL 530 combination GPS / ChartPlotter
Performance
- RAYMARINE ST-60 AWI / WS
Autopilot
- RAYMARINE Autohelm 4000+, 12 VDC, external drive
Entertainment
- Stereo, JVC, Model KD-NDR20, AM / FM / CD w/ speakers in Salon & Cockpit (note: under the Radar Arch)
Electrical & Systems
Electric
- The HUNTER 33-2 is provided with both a Ship's Service System, 12 VDC as well as a Shore Power System, 110 VAC.
- (2) Batteries, 12 VDC Type 27 Lead / Acid in boxes
- Battery charger, MARINCO 30 AH 125 AH
- Inverter, 750 Watt (2021)
- Shore Power System w/ MARINCO inlet, 110 VAC w/ 30' 30 AH cord
- DC Panel (w/ 2x outlets) & AC Panel (note: at Nav Station)
- Reverse-polarity light
- Galvanic Isolator, CHARLES MARINE Isolation Transformer for AC System
- Voltmeter & power indicator light
- Interior outlets, 110 VAC, GFI units throughout
Plumbing
- Fresh water capacity: 50 USG in (1) plastic tank
- Tank level gauge (note: at Nav Station)
- Hot & cold pressure water system (note: service to Head, Galley & Cockpit shower)
- Hot water heater, KUUMA (5) USG (note: heated by Shore Power & engine)
- (1) Bilge pump, manual
- (1) Bilge pump, RULE electric / automatic
- (1) Shower sump pump
Lighting, Exterior
Nav (note: split lens forward on bow pulpit, single unit aft)
- Anchor
- Steaming
- Arch
- Compass
- Lighting, Interior
- (8) Swivel / Reading
- (2) Florescent
- (2) Dome / Overhead
- (4) Recessed
Propulsion
The HUNTER 33-2 is powered by a YANMAR 3YM30 FWC (3) cylinder marine diesel that's rated at 24 HP at 3600 RPM.
- Hours: 650 (approximate)
- Fuel Capacity: 25 USG in (1) aluminum tank
- Fuel Level Gauge (note: at Nav Station)
- Propeller: (2) Blade, fixed pitch 16" diameter, bronze
- Prop (spare): (2) Blade, folding
- Prop Shaft: 1" stainless steel
- RACOR Fuel / Water Separator filter
- Insulated engine room
- Bilge blower, 12 VDC
Inventory, Additional
Ground Tackle
- Anchor windlass, SIMPSON-LAWRENCE, 12 VDC electric / manual
- DANFORTH-style anchor & rode w/ 10' galvanized chain & 150' x 5/8" nylon, (3) strand
- Bow anchor roller, stainless steel
- Bow anchor well
Canvas (SUNBRELLA)
- Dodger
- Bimini
- Connector piece for Dodger & Bimini
Safety
- USCG Gear (8x USCG Type II-III PFD's, horn, flares)
- CO2 Detector / Alarm, SAFE-T ALERT
- (3) Fire Extinguishers, B1 Dry Chemical
- Throwable PFD cushion, USCG Type IV
- Wood plug set for thru-hulls
- LIFESLING Man-Overboard Rescue System (note: mounted on stern rail, port side)
Misc
- Dock lines & fenders
- Cockpit cushions
- Stern rail "perch" seats w/ SUNBRELLA cushions
- Swim ladder, folding, stainless steel (note: mounted at Transom entrance)
- Solar ventilator
- Barbeque grill, stainless steel w/ camping gas bottle (note: mounted on stern rail, port side aft)
- Boat hook
- Winch handle holder, LEWMAR (note: at Companionway, port side)
- LEV-O-GAGE Angle Of Heel Indicator (note: mounted at Companionway)
Listing MLS by Yachtr.com
About
Hunter Sailboats – Affordable, Comfortable, and Easy-to-Sail Cruisers
Looking for a sailboat that combines comfort, performance, and ease of handling? Hunter Sailboats, known for their innovative designs and user-friendly features, offer the perfect blend for both new sailors and seasoned cruisers. Built with a focus on cruising comfort and practicality, Hunter sailboats are an ideal choice for weekend getaways, family adventures, or extended voyages.
Key Features of Hunter Sailboats:
- Innovative B&R Rig: Designed with swept-back spreaders, the Hunter B&R rig eliminates the need for a backstay, providing easier sail handling and improved downwind performance, making your sailing experience smoother and more efficient.
- Easy to Handle: Perfect for single-handed or short-handed sailing, Hunter boats feature roller furling mainsails and headsails, self-tailing winches, and all lines led aft to the cockpit, allowing you to enjoy stress-free cruising with minimal crew.
- Spacious Interiors: Hunter sailboats are renowned for their spacious and comfortable interiors, offering ample room below deck with bright, open saloons, large galleys, and full-beam aft cabins. Designed for cruising comfort, they provide plenty of space for family and guests.
- Affordable Cruising: Hunter Sailboats deliver excellent value for their price, offering well-equipped vessels at a fraction of the cost compared to other brands. Enjoy a feature-rich, high-quality sailboat without breaking the bank.
- Built for Comfort and Stability: With wide decks, large cockpits, and a cruising-focused design, Hunter sailboats offer excellent stability and comfort. Whether you're out for a weekend sail or on an extended trip, these boats are designed for a relaxing and enjoyable experience on the water.
- Durable Construction: Hunter’s advanced construction techniques, including a laminated grid structure, ensure strength and longevity. Their solid hulls and efficient keel designs provide reliable performance in various wind and sea conditions.
If you're ready to embark on your next adventure with a sailboat that combines comfort, innovation, and ease of use, Hunter Sailboats is the perfect choice.
Contact Us
"*" indicates required fields
Hal Slater, CPYB
President/Owner
333 Boston Post Road
Westbrook CT 06498 USA
Office: 860-919-9834
Fax: 1-860-345-1063
Cell: 1-860-919-9834
Email: hslater@breweryacht.com
Hal acquired the Brewer Yacht Sales from Brewer Yacht Yards (now within the family of Safe Harbor Marinas) with the goal of continuing the Brewer tradition of honesty, integrity, and respect. Although Brewer Yacht Sales is now an independent entity, it is dedicated to continuing “business as usual†with the Brewer team and providing professional, knowledgeable guidance as clients pursue their dreams of being on the water. Brewer Yacht Sales will continue to have offices at the ten present locations at Brewer/Safe Harbor Marinas located in Connecticut, Rhode Island, Massachusetts and New York with growth plans to expand the locations from Maine to Florida and nationally to serve their client base as a preferred business partner of Safe Harbor Marinas.