2012 J Boats J/70
Triad trailer with port and starboard storage boxes, Torqueedo electric engine and Nissan 4hp delivery engine, lots of "go-fast" gear. Call today!
LocationWest Haverstraw, NY, US
Flag of Registry
Available for sale in U.S. watersYes
Length23 ft - 7.01 meter
LOA:22 ft 8 in - 6.91 meter
Beam:7 ft 5 in - 2.26 meter
Draft - max:4 ft 9 in - 1.45 meter
Model:? Nissan 4hp outboard for deliveries
- 2012 Triad
Sails & equipment
CLASS SAILS (mainsail, roller furling jib, spinnaker):
2014 Quantum Sails ? 3 regattas
2013 North Sails - 2 regattas
2012 Doyle Sails ? 1 regatta
Mast and spreaders (2015)
Carbon wear pads on all blocks and mast step
Non-stretch jib sheets
Continuous spinnaker sheet Masthead flicker
Sail 22 decking for cockpit
Third hands with keepers
Harken tiller extension
Two lifting straps
Spinnaker bags(2) ? 1 mounted in companionway
Baltoplate bottom paint
V-berth cushions (new)
Velocitek Pro Start (Distance-to-line tool. Includes speed and course over ground)
Carbon bracket for Pro Start
Tack Tick wireless Racemaster (tactical race compass and windshift indicator)
4 inflatable life jackets
Anchor and rode
First Aid kit
2012 Triad trailer
Stainless steel disc brakes
Twin rear stabilizer jacks
Wheel tie-down straps
Spare tire (new) 2 large (6') dock boxes on trailer
Top Gun deck cover
Nylon blade and tiller bag
Boom transport cover
Cabin hatch and drop board bag
Keel lift padded bag
Mast transport cover
Stainless steel mast support bracket
Delrin keel blocks (4)
MANUFACTURER'S J 70 Specifications: (for a 2013 boat 2012 boat will be comparable)
J/70 hull laminated with biaxial and unidirectional E-glass fabrics and balsa core for rugged durability.
Deck molded with similar glass fabrics and Corecell foam core. High density core material and additional glass reinforcements are placed in way of highly loaded hardware.
All laminates are engineered and built to required ISO structural standards.
Molded internal bulkheads and ring frames with gelcoat finish, bonded to the hull and/or deck.
Molded lift-keel structure jigged, aligned and integrally molded during primary hull layup.
High strength, inward turning and overlapping hull to deck joint bonded with structural adhesive.
Molded non-skid on horizontal deck surfaces.
4.75' draft lifting keel with lead ballast featuring an internal leading-edge kelp cutting mechanism operable from the cockpit while underway, SS lock down plate and a single point lifting ring w/2:1 aluminum keel crane lift system.
(2) Harken investment cast diamond boat lift padeyes installed adjacent to keel P&S.
High aspect transom mounted molded rudder.
Lightweight aluminum outboard bracket mounted to transom.
Large self-draining cockpit with molded foot braces on centerline.
Molded companionway cover both hinged & removable with lockable drop board.
Molded foredeck toe-rails P & S. SS custom fabricated chain plates for shrouds and backstay terminations.
Interior ventilation hatch mounted on cabin house forward of mast.
(2) Harken B8 primary winches with cam cleats and 8? winch handle.
Two Ronstan black anodized jib T tracks with cars to accommodate 2:1 jib sheet terminations.
5:1 Harken mainsheet system leading to ratchet block and cam mounted on centerline swivel base.
Adjustable mainsheet traveler with 2:1 control line and cam cleats P & S.
Double ended backstay adjuster purchase system leading forward to P & S cam cleats.
Internal bowsprit launching system to exit aft face of the cabin house to cam cleat.
Harken Small Boat Underdeck headsail furling system with hoistable swivel and control line exiting aft face of cabin house to cam cleat.
Tack line cam cleat mounted to starboard on cabin.
(4) Spinnaker sheet blocks with (2) outboard of primary winches and (2) aft.
(2) halyard lead blocks mounted at mast base.
Four low height SS stanchions and two reinforced SS stern rails at transom corners.
12? Dyneema lifelines surrounding the cockpit with comfort pads and termination points on deck edge forward of shrouds.
Dyneema transom lifeline gate with quick release Foredeck U-bolt for mooring/dock line attachments
Spars & Rigging:
Carbon fiber mast with single swept carbon spreaders, carbon masthead crane and mainsail luff track. Easy to raise and lower with deck step design and tabernacle system. Mast finished in satin black with contrasting white bands.
Carbon fiber boom with internal 4:1 outhaul, mainsheet attachment point, outhaul and single reef sheaves as well as provision for reef cleat and block at inboard end. Finished in satin black with contrasting white bands.
Carbon bow sprit with tack ferrule fitting, painted black finish and seal system mounted at sprit housing.
1 x 19 wire standing rigging with adjustable Ronstan turnbuckles for shrouds..
Double ended boom vang system.
Main, jib & spinnaker halyards
Main sheet, spinnaker sheets, jib sheets
18" main sheet strop Tack line
Sprit control line
Vang control line
Traveler control lines
Dyneema bow bridal for trailer loading
Air dry gelcoat finish on hull & deck surfaces
Removable cabin floor
(2) Bench style molded seats port and starboard
Bin storage aft of seats.
Molded liner platform with inspection port.
Molded cockpit support bulkhead with inspection port.
Anodized aluminum compression post to transfer mast step loads to internal hull structure.
Molded entry step.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.